TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 398 of 1178
TM 9-2320-366-34-3 16-28. M1084/M1086 FOUR WAY CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR (CONT) (75) Install two preformed packings (92), preformed packings (93), and seal plate (94) on pilot valve body (90). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (76) Apply sealing compound to thread of four bolts (95). (77) Position pilot valve body (90) on valve body (51) with four bolts (95). (78) Tighten four bolts (95) to 45-55 lb-in. (5-6 N·m). e. Installation. (1) Apply sealing compound to threads of four bolts (1). NOTE Step (2) requires the aid of two assistants. (2) Position valve manifold assembly (2) in crane control panel (3) with four lockwashers (4) and bolts (1). (3) Tighten four bolts (1) to 41-45 lb-ft (56-61 N m). 16-162