TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 396 of 1178
TM 9-2320-366-34-3 16-28. M1084/M1086 FOUR WAY CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR (CONT) (56) Install two preformed packings (69) and five preformed packings (70) in valve manifold (3). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (57) Apply sealing compound to threads of four screws (71). (58) Install valve body (51) on valve manifold (3) with four screws (71). (59) Apply sealing compound to threads of lever (72). (60) Install lever (72) in pinion seal (60). (61) Install nut (73) and knob (74) on lever (72). (62) Perform steps (40) through (61) on remaining valve bodies. NOTE All solenoids are assembled the same way. One solenoid shown. (63) Install solenoid cylinder (76) and solenoid sleeve (77) on solenoid (78). 16-160