TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 395 of 1178

TM 9-2320-366-34-3 (48) Install pinion seal (60) in lever cap (57) with matchmarks aligned. (49) Install carrier nut (61) in lever cap (57). (50) Install sealing washer (62) and rack support bolt (63) in lever cap (57). NOTE Perform steps (51) through (54) on Telescopic and Lift Control valves. (51) Position setscrew (64) in lever cap (51). (52) Position sealing washer (65) and nut (66) on setscrew (64). (53) Adjust and tighten setscrew (64) and nut (66) to position marked during removal. (54) Position sealing washer (67) and dust cap (68) on setscrew (64). NOTE Dust cap has a break away nut. Nut will break away when correct torque has been reached. (55) Tighten dust cap (68) until nut breaks away. 16-159