Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 394 of 1178

TM 9-2320-366-34-3 16-28. M1084/M1086 FOUR WAY CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR (CONT) NOTE • Lubricate all parts with lubricating oil during assembly. • All control valve bodies are assembled the same way. Lift Control valve body shown. (42) Install spool (50) in valve body (51). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (43) Apply sealing compound to threads of four screws (52). (44) Install preformed packing (53), end cap (54) and four screws (52) on valve body (51) with matchmarks aligned. (45) Apply sealing compound to threads of four screws (55). (46) Install preformed packing (56), lever cap (57) and four screws (55) on valve body (51) with matchmarks aligned. (47) Install two backup rings (58) and quad rings (59) on pinion seal (60). 16-158