TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 386 of 1178
TM 9-2320-366-34-3 16-28. M1084/M1086 FOUR WAY CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR (CONT) (20) Remove rack support bolt (36) and sealing washer (37) from lever cap (35). Discard sealing washer. CAUTION Lever cap and carrier nut are a matched set and must be kept together. Failure to comply may result in damage to equipment. (21) Remove carrier nut (38) from lever cap (35). (22) Match mark pinion seal (23) to lever cap (35). (23) Remove pinion seal (23) from lever cap (35). (24) Remove two backup rings (39) and quad rings (40) from pinion seal (23). Discard backup rings and quad rings. (25) Match mark lever cap (35) to valve body (3). (26) Remove four screws (41), lever cap (35), and preformed packing (42) from valve body (3). Discard preformed packing. (27) Match mark end cap (43) to valve body (3). (28) Remove four screws (44), end cap (43), and preformed packing (45) from valve body (3). Discard preformed packing. (29) Remove spool (46) from valve body (3). (30) Perform steps (13) through (29) on remaining valve bodies (3). 16-150