TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 379 of 1178
TM 9-2320-366-34-3 (35) Apply sealing compound to threads of two screws (42) and screws (43). (36) Install two preformed packings (44), preformed packings (45), and unloader control valve (46) on inlet body (6) with two screws (42) and screws (43). e. Installation. WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (1) Apply sealing compound to threads of screws (1). NOTE Step (2) requires the aid of an assistant. (2) Position three way control valve assembly (2) in crane control panel (3) with four lockwashers (4) and screws (1). (3) Tighten four screws (1) to 41-45 lb-ft (56-61 N m). (4) Connect eight hydraulic tubes (5) to fittings (6). 16-143