TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 375 of 1178

TM 9-2320-366-34-3 (4) Install two preformed packings (7) on plugs (8). (5) Install two plugs (8) in inlet body (6). (6) Install preformed packing (9) on fitting (10). (7) Install fitting (10) in inlet body (6). (8) Install two preformed packings (11) on fittings (12). (9) Install two fittings (12) in inlet body (6). NOTE · Lubricate all parts with lubricating oil during assembly. · All valve bodies are assembled the same way. Mast control valve body shown. (10) Install spool (13) in valve body (14). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (11) Apply sealing compound to threads of four screws (15). (12) Install preformed packing (16), end cap (17), and four screws (15) on valve body (14) with matchmarks aligned. 16-139