TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 371 of 1178
TM 9-2320-366-34-3 (5) Remove three nuts (10) and two valve bodies (8) from inlet body (4). (6) Remove six preformed packings (11) from inlet body (4). Discard preformed packings. NOTE All valve bodies are disassembled the same way. Mast Control valve body shown. (7) Remove two fittings (12) from valve body (8). (8) Remove two preformed packings (13) from valve body (8). Discard preformed packings. (9) Remove lever (14) from pinion seal (15). (10) Remove knob (16) and nut (17) from lever (14). (11) Remove dust cap (18) and sealing washer (19) from setscrew (20). Discard sealing washer and dust cap. NOTE Count the number of threads on setscrew and record for assembly. (12) Remove nut (21) and sealing washer (22) from setscrew (20). Discard sealing washer. (13) Remove setscrew (20) from lever cap (23). 16-135