TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 369 of 1178
TM 9-2320-366-34-3 16-27. M1084/M1086 THREE WAY CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 26, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Pan, Drain (Item 43, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) Rag, Wiping (Item 60, Appendix C) Materials/Parts (Cont) Oil, Lubricating (Item 45, Appendix C) Adhesive (Item 7, Appendix C) Sealing Compound (Item 76, Appendix C) Cap, Protective, Dust (3) (Item 30, Appendix F) Kit, Seal (Item 108, Appendix F) Kit, Seal (Item 120, Appendix F) Packing, Preformed (Item 224.3, Appendix F) Lockwasher (4) (Item 140, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 29, Appendix C) Kit, Seal (Item 107, Appendix F) Packing, Preformed (Item 224.4, Appendix F) Personnel Required (2) a. Removal. CAUTION Cap or plug hydraulic connections to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic tubes and connection points prior to disconnecting. (1) Disconnect hydraulic tube (1) from fitting (2). Change 1 16-133