TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 367 of 1178
TM 9-2320-366-34-3 WARNING Jack cylinder weighs approximately 170 lbs (77 kgs). Attach suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (14) requires the aid of an assistant. (14) Remove jack cylinder (7) from outrigger (6). b. Installation. (1) Position floor jack under outrigger (1). NOTE Step (2) requires the aid of an assistant. (2) Install jack cylinder (2) in outrigger (1) until jack cylinder rests on floor jack. Adjust jack as necessary. (3) Remove two cotter pins (3) from pin (4). Discard cotter pins. (4) Remove pin (4) from jack cylinder (2). 16-131