TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 362 of 1178
TM 9-2320-366-34-3 16-24. M1084/M1086 CROSS RELIEF VALVE REPLACEMENT (CONT) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. (5) Install two preformed packings (8) on hydraulic motor (9). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (6) Apply sealing compound to threads of four screws (10). NOTE Step (7) requires the aid of an assistant. (7) Install cross relief valve (4) on hydraulic motor (9) with four lockwashers (11) and screws (10). (8) Tighten screws (10) to 28-42 lb-ft (38-57 N·m). (9) Connect hose (12) to fitting (3). (10) Connect two hoses (13) to 90-degree fittings (7). 16-126