TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 361 of 1178
TM 9-2320-366-34-3 NOTE Step (4) requires the aid of an assistant. (4) Remove four screws (6), lockwashers (7), and cross relief valve (1) from hydraulic motor (8). Discard lockwashers. (5) Remove two preformed packings (9) from hydraulic motor (8). Discard preformed packings. (6) Remove two 90-degree fittings (3) from cross relief valve (1). (7) Remove two preformed packings (10) and performed packings (11) from 90-degree fittings (3). Discard preformed packings. (8) Remove fitting (5) from cross relief valve (1). (9) Remove preformed packings (12 and 13) from fitting (5). Discard preformed packing. b. Installation. (1) Install preformed packings (1 and 2) on fitting (3). (2) Install fitting (3) in cross relief valve (4). (3) Install two preformed packings (5) and preformed packings (6) on 90-degree fittings (7). (4) Install two 90-degree fittings (7) in cross relief valve (4). 16-125