TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 360 of 1178
TM 9-2320-366-34-3 16-24. M1084/M1086 CROSS RELIEF VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Pan, Drain (Item 43, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Lockwasher (4) (Item 139, Appendix F) Materials/Parts (Cont) Packing, Preformed (3) (Item 262, Appendix F) Packing, Preformed (3) (Item 236, Appendix F) Packing, Preformed (2) (Item 263, Appendix F) Sealing, Compound (Item 76, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Personnel Required (2) a. Removal. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. (1) Position drain pan under cross relief valve (1). WARNING Cap or plug hydraulic hoses and fittings to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic hoses and connection points prior to disconnecting. (2) Disconnect two hoses (2) from 90-degree fittings (3). (3) Disconnect hose (4) from fitting (5). 16-124