TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 36 of 1178
TM 9-2320-366-34-3 WARNING SUMMARY (CONT) WARNING Use care in placement of pressure gage and STE/ICE-R instruments used to perform these adjustments. Hydraulic system pressures are 3000 PSI (20685 kPa). Hoses will move or jump under this pressure. Secure test instruments, as required. Failure to comply may result in injury to personnel or damage to equipment. WARNING Cap, fitting, and four way relief may be very hot, use gloves while removing. Failure to comply may result in injury to personnel. WARNING Use care while performing adjustments. Stay clear of dump body while operating. Failure to comply may result in injury to personnel. WARNING Hoist cylinder weighs approximately 430 lbs (195 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. WARNING Hoist cylinder weighs approximately 430 lbs (195 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. WARNING Machine gun ring assembly weighs approximately 350 lbs (159 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. WARNING Machine gun ring assembly weighs approximately 350 lbs (159 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. ah Change 1