TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 326 of 1178
TM 9-2320-366-34-3 16-18. M1084/M1086 HOLDING VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Materials/Parts Kit, Seal (Item 107, Appendix F) a. Removal. (1) Remove holding valve (1) from motor control valve (2). (2) Remove three preformed packings (3) from holding valve (1). Discard preformed packings. (3) Remove two preformed packings (4) from holding valve (1). Discard preformed packings. (4) Remove preformed packing (5) from holding valve (1). Discard preformed packing. 16-90