TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 319 of 1178
TM 9-2320-366-34-3 (15) Remove rear swivel nut (21) from tension load cell (20). (16) Remove tension load cell (20) from boom brace (18). b. Installation. (1) Install rear tension load cell (1) in boom brace (2) with rear swivel nut (3). (2) Tighten rear swivel nut (3) until flush with end. (3) Route tension load cell cable (4) through hole in boom brace (2). WARNING Hoist assembly weighs approximately 210 lbs (95 kgs). Attach suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (4) requires the aid of an assistant. (4) Position hoist assembly (5) on front of tension load cell (1) with front swivel nut (6). 16-83