TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 318 of 1178
TM 9-2320-366-34-3 16-16. M1084/M1086 TENSION LOAD CELL REPLACEMENT (CONT) WARNING Do not remove swivel nut on back side of tension load cell at this time. Failure to comply may result in injury to personnel or damage to equipment. (11) Loosen rear swivel nut (21) until flush with rear end of tension load cell (20). WARNING Hoist assembly weighs approximately 210 lbs (95 kgs). Attach suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (12) and (13) require the aid of an assistant. (12) Lift up on hoist assembly (22). (13) Remove front swivel nut (23) from front of tension load cell (20). (14) Remove hoist assembly (22) from tension load cell (20). 16-82