TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 313 of 1178
TM 9-2320-366-34-3 (4) Remove two screws (8), washers (9), and bracket (10) from hoist assembly (11). (5) Remove two screws (12), lockwashers (13), washers (14), and plate (15) from bracket (10). Discard lockwashers. (6) Remove nut (16) and proximity sensor (17) from plate (15). b. Installation. (1) Remove nut (1) from proximity sensor (2). (2) Install proximity sensor (2) in plate (3) with nut (1). (3) Install plate (3) on bracket (4) with two washers (5), washers (6), and screws (7). 16-77