TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 300 of 1178
TM 9-2320-366-34-3 16-12. M1084/M1086 TURNTABLE BEARING REPLACEMENT (CONT) (5) Remove two screws (1), washers (2), and chain from turntable bearing (3). b. Installation. (1) Install chain on turntable bearing (1) with two washers (2) and screws (3). WARNING Turntable bearing weighs approximately 150 lbs (68 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (2) and (3) require the aid of an assistant. (2) Lift turntable bearing (1) into position over subframe (4). (3) Feed hydraulic hoses (5) and electrical connector (6) through turntable bearing (1). 16-64