TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 296 of 1178
TM 9-2320-366-34-3 16-11. M1084/M1086 TURNTABLE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Boom assembly removed (para 16-3). Lift cylinders removed (para 16-7). Mast removed (para 16-10). Tension link cylinder removed (para 16-9). Erection cylinder removed (para 16-8). Hydraulic reservoir supply and return valves closed (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Tools and Special Tools Sling, Cargo (Item 56, Appendix B) Socket Wrench Attachment, Screwdriver (TM 9- 2320-366-20) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Packing, Preformed (2) (Item 236, Appendix F) Packing, Preformed (2) (Item 262, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Personnel Required (2) a. Removal. CAUTION Cap or plug hydraulic hoses and fittings to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hoses and connection points prior to removal. (1) Disconnect two hoses (1) from fittings (2). (2) Remove two fittings (2) from turntable (3). (3) Remove two preformed packings (4 and 5) from fittings (2). Discard preformed packings. (4) Match mark turntable (3) to ring gear (6). (5) Remove 10 bolts (7) and washers (8) from turntable (3). 16-60