Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 294 of 1178

TM 9-2320-366-34-3 16-10. M1084/M1086 MAST REPLACEMENT (CONT) WARNING Adhesive-sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (3) Apply sealing compound to threads of eight screws (4). (4) Install four tubes (5) on mast (1) with four clamps (6) and eight screws (4). WARNING RH Lift cylinder assembly weighs approximately 100 lbs (45 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. (5) Position RH lift cylinder (7) in mounting location on turntable (2). (6) Drive pivot shaft (3) through RH lift cylinder (7). (7) Install rivet eyebolt (8) in pivot shaft (3) at bottom of LH lift cylinder (9). (8) Apply adhesive sealant to threads of screw (10). (9) Position bushing (11), washer (12), and screw (10) in rivet eyebolt (8). (10) Tighten screw (10) to 190-210 lb-ft (258-285 N·m). 16-58