TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 291 of 1178
TM 9-2320-366-34-3 16-10. M1084/M1086 MAST REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Boom assembly removed (para 16-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Pan, Drain (Item 43, Appendix B) Sling, Cargo (Item 56, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Packing, Preformed (2) (Item 261, Appendix F) Packing, Preformed (2) (Item 235, Appendix F) Sealing Compound (Item 76, Appendix C) Personnel Required (2) a. Removal. CAUTION Cap or plug hydraulic hoses to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hoses and connection points prior to disconnecting. (1) Disconnect hoses (1 through 4) from counterbalance valve (5). (2) Remove two preformed packings (6) from fittings (7). Discard preformed packings. (3) Remove two preformed packings (8) from fittings (9). Discard preformed packings. 16-55