TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 290 of 1178
TM 9-2320-366-34-3 16-9. M1084/M1086 TENSION LINK CYLINDER REPLACEMENT (CONT) (3) Install rivet eyebolt (5) in upper pivot shaft (4). WARNING Adhesive-sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (4) Apply adhesive-sealant to threads of screw (6). (5) Install bushing (7), washer (8), and screw (6) in rivet eyebolt (5). (6) Tighten screw (6) to 190-210 lb-ft (258-285 N·m). (7) Install tension link cylinder (2) in turntable (9) with lower pivot shaft (10). (8) Install rivet eyebolt (11) in lower pivot shaft (10). (9) Apply adhesive-sealant to threads of screw (12). (10) Install bushing (13), washer (14), and screw (12) in rivet eyebolt (11). (11) Tighten screw (12) to 190-210 lb-ft (258-285 N·m). c. Follow-On Maintenance. (1) Lubricate MHC (TM 9-2320-366-20). (2) Perform crane load test (para 16-31). End of Task. 16-54