TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 288 of 1178
TM 9-2320-366-34-3 16-9. M1084/M1086 TENSION LINK CYLINDER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions MHC erected with end of boom lowered in cargo bed (TM 9-2320-366-10-1). Engine shutdown (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-600 ft-lb (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Materials/Parts Sealing Compound (Item 76, Appendix C) Grease, Automotive and Artillery (Item 35, Appendix C) Personnel Required (2) a. Removal. (1) Remove screw (1), washer (2), and bushing (3) from rivet eyebolt (4). (2) Remove rivet eyebolt (4) from lower pivot shaft (5). (3) Remove lower pivot shaft (5) and tension link cylinder (6) from turntable (7). (4) Remove screw (8), washer (9), bushing (10), and rivet eyebolt (11) from upper pivot shaft (12). WARNING Drive pivot shaft out far enough to release tension link cylinder. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (5) and (6) require the aid of an assistant. (5) Drive pivot shaft (12) and tension link cylinder (6) from boom assembly (13). (6) Remove tension link cylinder (6) from boom assembly (13). 16-52