TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 287 of 1178
TM 9-2320-366-34-3 (6) Install rivet eyebolt (10) in upper pivot shaft (9). WARNING Adhesive-sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (7) Apply sealing compound to threads of screw (11). (8) Position bushing (12), washer (13), and screw (11) in rivet eyebolt (10). (9) Tighten screw (11) to 190-210 lb-ft (258-285 N m). (10) Install lower pivot shaft (14) in erection cylinder (2). (11) Install rivet eyebolt (15) in lower pivot shaft (14). (12) Apply sealing compound to threads of screw (16). (13) Position bushing (17), washer (18), and screw (16) in rivet eyebolt (15). (14) Tighten screw (16) to 190-210 lb-ft (258-285 N m). (15) Connect two hydraulic hoses (19) to 90-degree fittings (5 and 6). c. Follow-On Maintenance. (1) Lubricate MHC (TM 9-2320-366-20). (2) Perform crane load test (para 16-31). End of Task. 16-51