TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 282 of 1178
TM 9-2320-366-34-3 16-7. M1084/M1086 LIFT CYLINDER REPLACEMENT (CONT) WARNING Lift cylinder assembly weighs approximately 100 lbs (45 kg). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Step (8) requires the aid of an assistant. • LH and RH lift cylinder are installed the same way. RH lift cylinder shown. (8) Install lift cylinder (2) in turntable (13) with pivot shaft (14). (9) Install rivet eyebolt (15) in pivot shaft (14). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (10) Apply sealing compound to threads of screw (16). (11) Position bushing (17), washer (18), and screw (16) in rivet eyebolt (15). (12) Tighten screw (16) to 190-210 lb-ft (258-285 N m). 16-46