TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 279 of 1178
TM 9-2320-366-34-3 16-7. M1084/M1086 LIFT CYLINDER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions MHC erected with end of boom level over cargo bed (TM 9-2320-366-10-1). Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Pan, Drain (Item 43, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Materials/Parts (Cont) Grease, Automotive and Artillery (Item 35, Appendix C) Sealing Compound (Item 76, Appendix C) Packing, Preformed (3) (Item 236, Appendix F) Packing, Preformed (Item 262, Appendix F) Packing, Preformed (Item 235, Appendix F) Packing, Preformed (Item 261, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Personnel Required (2) a. Removal. CAUTION Cap or plug hydraulic connections to prevent contaminating hydraulic system. Failure to comply may result in damage to equipment. NOTE · Tag hydraulic hoses and connection points prior to disconnecting. · LH and RH lift cylinders are removed the same way. RH lift cylinder shown. (1) Position drain pan under RH lift cylinder (1). (2) Disconnect hydraulic hoses (2 through 5) from counterbalance valve (6). 16-43