Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 277 of 1178

TM 9-2320-366-34-3 NOTE Step (15) requires the aid of an assistant. (15) Raise LH lift cylinder (16) in position with boom base section (1). (16) Install upper pivot shaft (17) in LH lift cylinder (16). (17) Install rivet eyebolt (18) in pivot shaft (17). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (18) Apply sealing compound to threads of screw (19). (19) Position bushing (20), washer (21), and screw (19) in rivet eyebolt (18). (20) Tighten screw (19) to 190-210 lb-ft (258-285 N·m). (21) Apply grease to grease fittings for tension link cylinder, erection cylinder, and lift cylinders (TM 9-2320-366-20-2). 16-41