TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 276 of 1178
TM 9-2320-366-34-3 16-6. M1084/M1086 BOOM BASE SECTION REPLACEMENT (CONT) NOTE Step (9) requires the aid of an assistant. (9) Raise RH lift cylinder (10) in position with boom base section (1). (10) Install upper pivot shaft (11) in RH lift cylinder (10). (11) Install rivet eyebolt (12) in pivot shaft (11). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (12) Apply sealing compound to threads of screw (13). (13) Position bushing (14), washer (15), and screw (13) in rivet eyebolt (12). (14) Tighten screw (13) to 190-210 lb-ft (258-285 N·m). 16-40