TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 273 of 1178
TM 9-2320-366-34-3 (9) Remove screw (14), washer (15), and bushing (16) from rivet eyebolt (17). (10) Remove rivet eyebolt (17) from pivot shaft (18). WARNING Drive pivot shaft out far enough to release tension link cylinder. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (11) through (17) require the aid of an assistant. (11) Drive pivot shaft (18) from tension link cylinder (19). (12) Position tension link cylinder (19) against turntable (20). WARNING Drive pivot shaft out far enough to release mast. Failure to comply may result in injury to personnel or damage to equipment. (13) Drive pivot shaft (18) from mast (21). (14) Position mast (21) against turntable (20). 16-37