TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 269 of 1178

TM 9-2320-366-34-3 (12) Lift up on boom mid section (7) enough to allow installation of two body wear pads (11). (13) Install two body wear pads (11) in boom base section (10). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (14) Apply sealing compound to threads of four screws (12). (15) Position four washers (13) and screws (12) in telescopic cylinder (4). (16) Tighten screws (12) to 144-156 lb-ft (195-212 N·m). (17) Connect hydraulic hoses (14 and 15) to telescopic cylinder (4). 16-33