TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 262 of 1178
TM 9-2320-366-34-3 16-5. M1084/M1086 BOOM MID SECTION AND TELESCOPIC CYLINDER REPLACEMENT/ADJUSTMENT This task covers: a. Removal b. Cleaning/Inspection c. Installation d. Adjustment e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Boom fly section removed (para 16-4). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Sling, Cargo (Item 56, Appendix B) Goggles, Industrial (Item 28, Appendix B) Caliper Set, Micrometer, Outside (Item 9, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Gloves, Rubber (Item 26, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Rag, Wiping (Item 60, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) Rope, Fibrous (Ir\tem 62, Appendix C) Grease, Ord, Extreme Pressure (Item 38, Appendix C) Sealing Compound (Item 76, Appendix C) Packing, Preformed (2) (Item 262, Appendix F) Packing, Preformed (2) (Item 237, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Personnel Required (2) a. Removal. (1) Remove two screws (1), spacer block (2), and shim(s) (3) from outer end of boom base section (4). 16-26