TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 256 of 1178
TM 9-2320-366-34-3 16-4. M1084/M1086 BOOM FLY SECTION REPLACEMENT/ADJUSTMENT (CONT) (2) Remove four cotter pins (3) from two shafts (4). Discard cotter pins. (3) Remove two shafts (4) from boom fly section (5). (4) Remove two screws (6), spacer block (7), and shim(s) (8) from boom mid section (9). WARNING • Boom fly section weighs approximately 120 lbs (55 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. • A guide rope must be attached to aid in controlling boom fly section during removal. Failure to comply may result in injury to personnel. NOTE Steps (5) and (6) require the aid of an assistant. (5) Adjust cargo sling to balance boom fly section (5). (6) Remove boom fly section (5) from boom mid section (9). 16-20