TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 253 of 1178

TM 9-2320-366-34-3 (16) Install upper pivot shaft (17) through LH lift cylinder (16) and boom assembly (1). (17) Install rivet eyebolt (18) in pivot shaft (17). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (18) Apply sealing compound to threads of screws (19). (19) Position bushing (20), washer (21), and screw (19) in rivet eyebolt (18). (20) Tighten screw (19) to 190-210 lb-ft (258-285 N·m). (21) Connect four hydraulic hoses (22) to fittings (23). 16-17