TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 252 of 1178
TM 9-2320-366-34-3 16-3. M1084/M1086 BOOM ASSEMBLY REPLACEMENT (CONT) (10) Install upper pivot shaft (11) through RH lift cylinder (10) and boom assembly (1). (11) Install rivet eyebolt (12) in pivot shaft (11). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (12) Apply sealing compound to threads of screw (13). (13) Position bushing (14), washer (15), and screw (13) in rivet eyebolt (12). (14) Tighten screw (13) to 190-210 lb-ft (258-285 N·m) (15) Raise LH lift cylinder (16) in position with boom assembly (1). 16-16