TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 242 of 1178
TM 9-2320-366-34-3 16-2. M1084/M1086 MATERIAL HANDLING CRANE (MHC) REPLACEMENT (CONT) NOTE Step (7) requires the aid of two assistants. (7) Remove crane (10) from vehicle. (8) Install outrigger pads (16) on jack cylinders (17). (9) Position MHC (10) on trestles. b. Installation. WARNING • Material Handling Crane (MHC) assembly weighs approximately 3030 lbs (1375 kgs). Attach suitable lifting device prior to installation. Failure to comply may result in serious injury or death to personnel or damage to equipment. • Personnel must stand clear during lifting operations. Failure to comply may result in serious injury or death to personnel. • A guide rope must be attached to aid in controlling Material Handling Crane (MHC) during installation. Failure to comply may result in serious injury or death to personnel. (1) Remove outrigger pads (1) from jack cylinders (2). NOTE Step (2) requires the aid of two assistants. (2) Position MHC (3) on vehicle. 16-6