TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 235 of 1178
TM 9-2320-366-34-3 Change 2 15-155 (19) Position bracket (37) on support structure (3) with spring (38), bolt (39), two washers (40), and self- locking nut (41). (20) Tighten self-locking nut (41) to 76-84 lb-ft (103-114 N•m). (21) Install remote control cable connector (42) on support structure (3) with four screws (43) and nuts (44). (22) Install connector cover (45) on remote control cable connector (42). (23) Install two lanyards (46) on support structure (3) with screw (47) and nut (48). (24) Perform steps (15) through (23) on right side of support structure. (25) Install two adapters (49) on support structure (3) with two nuts (50). (26) Position two hydraulic hoses (51) to adapters (49). (26.1) Tighten hydraulic hoses (7) to 38-47 lb-ft (52-64 N•m). NOTE Perform steps (25) through (28) on left side of support structure.