TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 232 of 1178

TM 9-2320-366-34-3 15-12. M1089 TOOL BOX SUPPORT STRUCTURE REPLACEMENT (CONT) b. Installation. CAUTION When installing cushions, top cushion must be installed with metal side up and bottom cushion must be installed with metal side down. Failure to comply may result in damage to equipment. (1) Position cushion (1) and right side mount (2) on support structure (3) with two screws (4), cushion (5), four washers (6), two lockwashers (7), and self-locking nuts (8). (2) Tighten two self-locking nuts (8) until cushions (1 and 5) begin to bulge. (3) Position cushion (9) and left rear mount (10) on support structure (3) with two screws (11), cushion (12), four washers (13), two lockwashers (14), and self-locking nuts (15). (4) Tighten two self-locking nuts (15) until cushions (9 and 12) begin to bulge. (5) Position cushion (16) and left front mount (17) on support structure (3) with two screws (18), cushion (19), four washers (20), two lockwashers (21), and self-locking nuts (22). (6) Tighten two self-locking nuts (22) until cushions (16 and 19) begin to bulge. 15-152