TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 227 of 1178
TM 9-2320-366-34-3 Change 2 15-147 15-12. M1089 TOOL BOX SUPPORT STRUCTURE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Rear side marker lights removed (TM 9-2320-366-20- 3). Back-up lights removed (TM 9-2320- 366-20-3). Stoplights and brackets removed (TM 9-2320-366- 20-3). Worklights removed (TM 9-2320-366-20-3). Tool boxes and decks removed (TM 9-2320-366-20- 4). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Pan, Drain (Item 43, Appendix B) Sling, Cargo (Item 56, Appendix B) Wrench Set, Crow Foot Patch Inc-(TM-9-2320-366- 20) (Appendix B, item 87) Tools and Special Tools (Cont) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Lubricating Oil, Engine (Item 46, Appendix C) Tape, Anti-seizing (Item 84, Appendix C) Ties, Cable Plastic (Item 92, Appendix C) Nut, Self-Locking (6) (Item 211, Appendix F) Nut, Self-Locking (6) (Item 180, Appendix F) Washer, Lock (6) (Item 142, Appendix F) Nut, Self-locking (2) (Item 196, Appendix F) Rope, Fibrous (2) (25 ft long) (Item 62, Appendix C) Personnel Required (3) a. Removal. (1) Remove two plugs (1) from adapters (2). (2) Remove nut (3), screw (4), lanyard (5) and two plugs (1) from support structure (6). CAUTION Cap or plug hydraulic hoses to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE • Tag hoses, cables, and connection points prior to disconnecting. • Perform steps (1) through (5) on left side of support structure.