TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 218 of 1178
TM 9-2320-366-34-3 15-10. M1090/M1094 DUMP BODY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Dump body cab protector removed (para 15-11). Tailgate removed (TM 9-2320-366-20-4). Pneumatic cylinder removed (TM 9-2320-366-20-5). Troopseats removed, if equipped (TM 9-2320-366-10-2). Mudflaps removed (TM 9-2320-366-20-4). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Pliers, Retaining Ring (Item 45, Appendix B) Tools and Special Tools (Cont) Goggles, Industrial (Item 28, Appendix B) Sling, Cargo (4) (Item 56, Appendix B) Lifting Brackets, Dump Body (4) (Item 8, Appendix D) Material/Parts Shackle (4) (Item 80, Appendix C) Personnel Required (3) WARNING Wear appropriate eye protection when working under vehicle due to possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Two lock pins are installed on each side of dump body. (1) Remove two safety pins (1) from lock pins (2). (2) Remove two lock pins (2) from dump body (3). 15-138