TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 199 of 1178
TM 9-2320-366-34-3 Change 2 15-124.1 b. Installation. NOTE (1) Position frame plate (1) on frame rail (2) with seven bolts (3), washers (4), and self-locking nuts (5). (2) Position bolt (6) in frame plate (1) with washer (7) and self-locking nuts (8). (3) Position three bolts (9) in frame rail (2) with three self-locking nuts (10). (4) Tighten seven self-locking nuts (5) and self-locking nut (8) to 53-58 lb-ft (72-78 N•m). (5) Tighten three self-locking nuts (10) to 210-255 lb-ft (285-305 N•m). (6) Position six bolts (11) in frame plate (1) with washers (12) and self-locking nuts (13). (7) Tighten six self-locking nuts (13) to 53-58 lb-ft (72-78 N•m). • Left and right side rear fender mounting brackets and extension brackets are installed the same way. Left side shown. • Steps (1) through (9) require the aid of an assistant.