TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 196 of 1178
TM 9-2320-366-34-3 15-7. CAB WINDSHIELD, SIDE WINDOW AND DOOR SIDE WINDOW REPLACEMENT (CONT) e. Cab Side Window Installation. (1) Position seal (1) in side window frame (2). (2) Position glass (3) in seal (1). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (3) Apply lubrication to locking groove in seal (1). (4) Insert rubber locking strip (4) in seal (1). f. Door Side Window Installation. (1) Apply lubrication to seal (1). (2) Install seal (1) around window (2). (3) Install twine around inside lip of seal (1). (4) Apply lubrication to inside of seal (1). (5) Position seal (1) and window (2) in frame (3). (6) Smooth outer lip of seal (1) around outer frame (3). (7) Pull twine from inside of frame (3) until seal (1) is evenly positioned. g. Follow-On Maintenance. Install windshield wipers (windshield replacement only) (TM 9-2320-366-20-5). End of Task. 15-122 Change 1