TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 191 of 1178
TM 9-2320-366-34-3 NOTE Position twine where both ends start and finish at the bottom LH corner of seal. (3) Position twine on seal (2) as shown. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (4) Apply lubrication compound to seal (2). NOTE Steps (5) through (13) require the aid of an assistant. (5) Position windshield (1) in cab (3). Change 1 15-120.3