TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 166 of 1178
TM 9-2320-366-34-3 15-5. M1093/M1094 CAB REAR WALL REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions M1093/M1094 cab roof removed (TM 9-2320-366-20-4). M42 Alarm removed, if equipped. Spare tire lowered (TM 9-2320-366-10-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Socket Set, Socket Wrench (Item 59, Appendix B) Wrench Set, Socket (TM 9-2320-366-20) Socket Wrench Attachment, Screwdriver (TM 9-2320- 366-20) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Torque, 0-75 lb-in. (Item 98, Appendix B) Tool Kit, Blind Rivet (Item 76, Appendix B) Materials/Parts Washer, Flat (Item 94, Appendix C) Nut, Self-locking (Item 53, Appendix C) Seal (2) (30 in. (750mm)) (Item 366, Appendix F) Screw, Captive (12) (Item 368, Appendix F) Insulation Panel (Item 72, Appendix F) Insulation Panel (Item 73, Appendix F) Insulation Panel (Item 74, Appendix F) Insulation Panel (Item 75, Appendix F) Insulation Panel (Item 76, Appendix F) Insulation Panel (Item 77, Appendix F) Lubricating Oil, Engine (Item 41, Appendix C) Personnel Required (2) a. Removal. (1) Release three latches (1) on clamps (2). (2) Remove davit (3) from three clamps (2). (3) Remove dustcap (4) from connector J62 (5). (4) Remove screw (6) and dustcap (4) from cab rear wall (7). (5) Remove three screws (8) and connector J62 (5) from cab rear wall (7). 15-98 Change 1