TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 158 of 1178
TM 9-2320-366-34-3 15-4. M1093/M1094 CAB SIDE WALL REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions M1093/M1094 cab roof removed (TM 9-2320-366- 20-4). Side window removed (para 15-7). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Socket Set, Socket Wrench (Item 59, Appendix B) Tools and Special Tools (Cont) Wrench Set, Socket (TM 9-2320-366-20) Material/Parts Washer, Flat (Item 93, Appendix C) Nut, Self-locking (Item 53, Appendix C) Screw, Captive (4) (Item 368, Appendix F) Seal (30 in. (750mm)) (Item 372, Appendix F) Lubricating Oil, Engine (Item 49, Appendix C) a. Removal. NOTE Left and right side cab side walls are removed the same way. Right side shown. (1) Remove plastic cover (1) from screw (2). (2) Remove screw (2), seat belt mounting bracket (3), washer (4), and spacer (5) from cab side wall (6). 15-90