TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 144 of 1178
TM 9-2320-366-34-3 15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT) CAUTION Lower cab straight down to clear radiator. Failure to comply may result in damage to equipment. (13) Position cab (24) on two bearing housings (25). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. Failure to comply may result in injury to personnel. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (14) Apply sealing compound to threads of two screws (26). NOTE Left and right side bearing housings are installed the same way. Right side shown. (15) Position two washers (27) and screws (26) in right side bearing housing (25). (16) Apply sealing compound to threads of four screws (28). (17) Position four screws (28) in right side bearing housing (25). (18) Tighten four screws (28) and two screws (26) to 34-42 lb-ft (47-57 N·m). (19) Perform steps (14) through (18) on left side bearing housing. 15-78 Change 1