TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 143 of 1178
TM 9-2320-366-34-3 (8) Tighten two self-locking nuts (19) to 199-243 lb-ft (270- 330 N·m). (9) Tighten nut (22) to 40-48 lb-ft (54-66 N·m). (10) Perform steps (7) through (9) on right side cab mounting bracket. WARNING Standard cab weighs approximately 1400 lbs (636 kgs). M1093/M1094 cab weighs approximately 1700 lbs (772 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in serious injury or death to personnel or damage to equipment. CAUTION Use spreader bar and place sheet rubber on cargo sling to prevent damage to cab roof. Failure to comply may result in damage to equipment. NOTE Steps (11) through (23) require the aid of two assistants. (11) Lower cab door windows and install cargo sling through rear section of cab doors (23). (12) Remove cab (24) from cab maintenance stand. 15-77