TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 141 of 1178
TM 9-2320-366-34-3 NOTE • Steps (4) and (5) require the aid of an assistant. • Left and right side of cab front support assembly is installed the same way. Left side shown. (4) Position two sleeve spacers (12), upper resilient mounts (13), and cab front support assembly (14) on two front bumper mounting brackets (15). (5) Position two lower resilient mounts (16) on front bumper mounting brackets (15) with two bolts (17), washers (18) and self-locking nuts (19). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. Failure to comply may result in injury to personnel. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (6) Apply sealing compound to threads of shoulder bolt (20). (7) Position shoulder bolt (20), washer (21), and nut (22) in cab mounting bracket (1). Change 1 15-76.1/(15-76.2 Blank)