TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 139 of 1178
TM 9-2320-366-34-3 NOTE Lubricate sleeve bushings with paraffin and mineral oil prior to installation. (3) Install sleeve bushing (4) in left side cab tilt arm (5). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. Failure to comply may result in injury to personnel. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (4) Apply adhesive sealant to threads on left side of cab front support (6). (5) Position left side bearing housing (2), washer (7), and spanner nut (8) on cab front support (6). (6) Tighten spanner nut (8) to 138-163 lb-ft (180-220 N·m). (7) Perform steps (1) through (6) on right side of cab front support assembly. d. Installation. (1) Position cab mounting bracket (1) on radiator mounting bracket (2) with two self-locking nuts (3). (2) Tighten two self-locking nuts (3) to 76-94 lb-ft (103-127 N·m). 15-75