TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 138 of 1178
TM 9-2320-366-34-3 15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT) b. Disassembly. (1) Remove spanner nut (1), washer (2), and left side bearing housing (3) from cab front support (4). (2) Remove sleeve bushing (5) from left side cab tilt arm (6). Discard sleeve bushing. (3) Remove sleeve bushing (7) from bushing (8). (4) Remove bushing (8) from left side bearing housing (3). Discard bushing. (5) Perform steps (1) through (4) on right side of cab front support assembly. c. Assembly. NOTE Lubricate bushings with paraffin and mineral oil prior to installation. (1) Install bushing (1) in left side bearing housing (2). (2) Install sleeve bushing (3) in bushing (1). 15-74